The Essential Guide to ADA-Compliant Elevators for Property Owners

The Americans with Disabilities Act (ADA) was endorsed in 1990. It made public places more accessible for people with disabilities. It covers a lot of different situations and has a big impact on building codes all over the country.

Elevators are among the most important parts of building codes that the ADA covers. If you’re building a new facility or remodeling an existing one, you’ll need to install ADA-compliant elevators that meet ADA elevator requirements.

Providing elevators for disabled people will help you ensure your building is compliant.

Are you concerned about meeting ADA elevator requirements? No need to worry. Check out these ADA elevator requirements.

Are ADA-Compliant Elevators Required?

There are buildings that may be exempt from some ADA requirements. Private buildings with fewer than three floors, or less than 3000 square feet per floor, are not required to include an ADA elevator.

Exceptions include shopping centers, a health care provider’s professional offices, or a public transportation facility/station. All other businesses built after 2010 must include an ADA elevator.

Owners of older buildings are required to comply with all ADA requirements. Otherwise, they risk being subject to liability lawsuits and federal fines.

Some businesses have reasons for not including an ADA elevator. They are still required to make “reasonable accommodations” for disabled individuals.

ADA Elevator Dimensions

When using an ADA-compliant elevator, the doors must stay open for at least three seconds. The elevator requirement gives people with disabilities enough time to get in and out safely.

ADA elevator dimensions must meet the ADA requirements. Doors must be 36 inches wide, so that wheelchairs can get in and out easily. The car depth is one inch.

The inside of a building elevator is 68 inches unless the ADA elevator has a center-opening door. In those models, the inside width must be 80 inches.

ADA Buttons and Signage

ADA elevator requirements are specific regarding elevator button designs and ADA signage.

Call buttons should be 0.75 inches big, so they’re easy to use. They should also be 42 inches above the floor.

Emergency controls are grouped at the bottom. Their centerlines are no more than 35 inches higher than the floor making it accessible so everyone can get to them in an emergency, regardless of their ability.

ADA signage is very important. Braille should be written on the control panel in textile letters, either right below the buttons or next to them. The numbers should be in ascending order to match the elevator.

There should also be a warning when the elevator reaches a certain floor. Buildings can use a green light or a recorded announcement.

Are You ADA-Compliant?

ADA-compliant elevators are designed to meet the needs of people with various disabilities.

Accessibility not only means being able to walk through the building but also being able to get out of the building in the event of an emergency. Whether someone is physically disabled, hearing, or visually impaired, using an elevator is a basic need.

Keystone Elevator Service & Modernization is available to inspect your elevators for ADA compliance. Contact us today to schedule an appointment.

Elevator Decommissioning: Why, When, and How

Elevator decommissioning is a complex job that requires specialists who understand the legal regulations associated with the process. Decommissioning and removing an unused elevator or model that’s in disrepair necessitates removing cabs, rails, wiring, the hydraulic system, and more. Keystone Elevator specializes in elevator services that include elevator decommissioning. We manage all the permitting that’s required by the Department of Public Safety as well as each aspect of the job, ensuring that your elevator’s decommissioning is compliant with safety laws. If you need your commercial elevator disconnected and removed, contact Keystone Elevator and let our elevator experts handle the job. 

Why Does Your Business Need to Decommission Its Elevator?

Decommissioning an elevator refers to the regulated process of dismantling and removing an elevator and its parts. Businesses or organizations that wish to remove a commercial elevator must hire a licensed elevator service that specializes in elevator decommissioning and procure the proper permits for the job per legal requirements. 

Commercial property owners might elect to remove an elevator from service for various reasons. The elevator may not be used enough to warrant its continued service. It might be old and in disrepair. Sometimes a property owner chooses to remove an elevator during remodeling projects or before installing a replacement elevator. 

No matter the reason for removing your elevator, Keystone Elevator will properly dismantle and dispose of your elevator’s parts by the current legal code. Elevator decommissioning requires careful attention to regulations to ensure safety. We’ll manage all aspects of the decommissioning process, allowing customers to rest assured that their elevator’s removal is in safe, capable hands. 

Elevator Decommissioning: Developing a Removal Plan

When your business contracts with Keystone Elevator for elevator decommissioning service, we’ll visit your premises to inspect your elevator and develop a plan for its decommissioning. Our specialists will carefully evaluate the job in association with proper procedures and elevator decommissioning regulations. After developing our plan, we’ll go over each detail with you and discuss the timeline and schedule for the job. If there are any special considerations or tasks, we can go over them before we begin the removal process.

Elevator Dismantling and Removal

The elevator dismantling and removal tasks are all part of proper commercial elevator decommissioning. Trust our elevator specialists to remove the car, rails, wiring, controllers, and other parts during the removal process. We also remove the hydraulic oil, oil lines, and tanks as part of our decommissioning service. All electrical and mechanical systems must be properly dismantled before they can be removed. We also your elevator’s doors as part of the decommissioning requirements to ensure public safety. 

Customers trust Keystone Elevator for elevator decommissioning as well as elevator installation and repair. We have a reputation for providing elevator service to all types of businesses and organizations. If you need to remove an existing elevator from your premises, contact us to discuss our elevator decommissioning service. 


What Actions to Take When Elevator Fault Codes Appear

Elevators are more than just a convenient way to get around your commercial building. If your structure is over two stories high, it’s likely a requirement for your building to be ADA-compliant.

Maintaining your elevator can help protect your investment, ensure ongoing ADA compliance, and help you pass the annual or biannual inspection required by the state of Massachusetts.

Even with regular maintenance, your elevator might still display a fault code from time to time. When this happens for the first time, you might be wondering how to handle it and what to do first. Keep reading as we explore what to do when elevator fault codes appear.

What to Do if Elevator Fault Codes Appear

When your fault monitor shows a code for the first time, you might have no idea how to handle it. However, ignoring that code can not only put users at risk but could also lead to a costly elevator violation for your business.

As soon as you notice something is wrong, use this elevator code checklist to get to the root of the problem.

Stay Calm

Noticing an error code on an elevator can be concerning. But it’s important to keep in mind that there are codes for a variety of different situations. Seeing an elevator fault code doesn’t necessarily mean that your elevator is at risk of a major malfunction.

The best thing that you can do when you see an elevator failure code is to remain calm. It’s a good idea to get everyone off the elevator and close it until you can get the code repaired.

The last thing you want to do is wait to address the problem. This can not only potentially put users in danger but could also lead to an elevator violation down the line.

Consult Your Manual.

When your elevator was installed, you should have received a manual. In this manual, you’ll find a list of all elevator fault codes.

Use this to diagnose what the fault code is about.

Schedule a Repair

The next step is to schedule an elevator repair. When you call your elevator repair specialist, you can provide them with the fault code and what the manual identifies it as. While they will do their own analysis when they arrive, having this information can help them better prepare for the repair.

Record the Repair and Code.

After the repair is completed, make sure to record the incident. Your business should have a log where all elevator repairs and incidents are recorded. Make a note of the date, what the fault code was, and the type of repair performed.

This information may help with future repairs if another fault code appears.

Maintaining Your Elevator

Seeing elevator fault codes for the first time can be scary and confusing. But using this elevator code checklist can help you get to the root of the problem quickly and allow you to get your elevator functioning again as soon as possible.

Scheduling regular preventive maintenance can help you reduce the frequency of fault codes. Check out the customized preventative maintenance programs to learn how Keystone can help you keep your elevators functioning properly year after year.

How Annual Elevator Inspection Services Enhance Your Riders’ Safety

Elevator inspection services are crucial for commercial properties in New England to ensure the safety of riders and comply with regulatory authorities. Improper facility management can lead to accidents or incidents, placing property managers at risk of legal responsibility for injuries or fatalities.

Annual Elevator Inspection Services

During annual elevator inspection services, certified professionals thoroughly examine elevator systems to ensure they are safe, comfortable, and efficient for all passengers. Regulatory authorities mandate these inspections, which are necessary for compliance with safety standards.

As a commercial property manager or facility manager in New England, you must have the elevators in your building inspected at least once every year. The interval between inspections varies based on the elevator use frequency, the manufacturer’s recommendations, and how often state and local regulations dictate.

Prioritizing rider safety is crucial for commercial property and facility managers as it impacts their reputation. A well-operating elevator that transports customers or clients in a safe and timely manner is good for business, and poor facility management can lead to accidents or incidents that can harm a company’s reputation.

In addition, failing to abide by elevator testing and inspection requirements set by regulatory authorities can have serious consequences, such as fines, passenger injuries, and other detrimental events.

The Benefits of Annual Elevator Inspection Services

Elevator inspections are crucial for ensuring the safety and longevity of elevator equipment. Here are some benefits of annual elevator inspection services:

Enhanced Rider Safety

Regular elevator inspections help identify potential safety hazards or malfunctions before they become major issues. Inspectors can detect issues such as worn sheaves, improper lubrication, and power failures. These issues can cause inconvenience, cost time and money, and even lead to injuries.

Elevator inspections can prevent breakdowns, minimize downtime, and increase productivity by detecting these issues early. The inspections also ensure that emergency response systems are functioning properly and that the overall safety of elevator equipment is maintained.

Compliance with Legal and Regulatory Requirements

As a commercial property manager, you are legally obligated to conduct annual elevator inspections to comply with government regulations. Failure to comply with these regulations can result in penalties and liabilities.

Elevator inspections can help maintain compliance and prevent legal issues by ensuring that elevator equipment adheres to specified codes and regulations. Inspections can also help identify deficiencies that can cause harm to users and require re-inspections to ensure the public’s safety.

Increased Longevity of Elevator Systems

Routine inspections and preventative maintenance are essential to identify minor issues and prevent them from escalating into major, costly repairs. While elevators are designed to offer 20-25 years of reliable service, constant usage, and evolving technologies necessitate eventual equipment upgrades.

Proactive maintenance and early detection can help avoid unexpected breakdowns and save money in the long run. A properly installed and regularly maintained elevator system will maximize your investment and property value, allowing you to execute any necessary modernization  as a planned upgrade investment as opposed to an emergency expense.

Reputation Enhancement

Prioritizing rider safety through annual inspections can improve the reputation of commercial properties and facilities. Efficient elevators are crucial for maintaining building efficiency and tenant retention while increasing the value and market appeal of the property.

Bottom Line

Elevator inspections are crucial for ensuring the safety and efficiency of elevators. Regular inspections can help identify minor damages and prevent major faults from developing, which can compromise the safety of passengers.

If you are a New England commercial property or facility manager, it is crucial to prioritize elevator inspections to ensure the safety of your riders and comply with legal requirements. Contact Keystone Elevator Repair and Inspection service provider to schedule an inspection or for more information.

Which is Right for You Between Freight Elevator vs Passenger Elevator

Are you in the process of designing or renovating a building that requires an elevator? Choosing the right type of elevator is vital for the safety and efficiency of your property’s operations. This guide discusses freight elevators vs passenger elevators to help you pick the appropriate choice for your building. Read on!

Freight Elevator Vs Passenger Elevator

Freight elevators are designed for transporting heavy or bulky items. They’re ideal for buildings requiring frequent good transportation, such as warehouses, factories, or hospitals. Typically, freight elevators are larger and can hold much more weight than passenger elevators. They’re equipped with loading and unloading mechanisms, such as rolling or hinged doors, to facilitate the movement of goods.

Passenger elevators are intended for transporting people between floors. They’re smaller than freight elevators. Passenger elevators can be found in various buildings, including residential complexes, shopping centers and skyscrapers. These elevators come in multiple designs, from basic models to high-speed and custom-built elevators with luxurious interiors.

Differences Between Freight and Passenger Elevators

When selecting an elevator for your building, you must understand the key distinctions, including:

Size and Capacity

Freight elevators are larger and have higher weight capacities than passenger elevators. A typical freight elevator has a capacity of up to 9,000 pounds or more. Passenger elevators are generally smaller and have less weight capacity than freight elevators.

Loading and Unloading Mechanisms

Freight elevators come with loading and unloading mechanisms, such as rolling or hinged doors, to facilitate the movement of goods. These doors are usually larger and sturdier than those in passenger elevators, making it easier to move bulky items. Passenger elevators have standard doors designed for the safe and easy entry and exit of people.

Speed and Operation

Freight elevators operate slower than passenger elevators due to their larger size and weight capacity. They have more robust operating systems, such as motor generators or hydraulic systems, to handle heavy loads. Passenger elevators come in various speeds, from standard to high-speed models that you can choose based on your needs.

Both freight and passenger elevators have various safety features for safe operation. However, freight elevators have additional safety features, such as emergency stop buttons, overspeed governors, and interlocks to prevent them from moving unless the doors are fully closed.

Which Type of Elevator Should You Choose?

The answer largely depends on your building’s needs. If your building requires frequent transportation of goods, a freight elevator may be the best option. If your building is intended for people, you must provide comfortable and efficient transportation, and a passenger elevator is the way to go. Here are factors to consider:

Building type and usage: A commercial building housing several businesses might require a larger freight elevator to handle the transportation of goods.

Type of goods for transportation: Heavy or bulky goods require a larger and more robust freight elevator, while a passenger elevator is suitable for lighter goods.

Frequency of use: If your building has frequent elevator use, you might need a more durable and reliable elevator, such as a freight elevator.

Choose an Appropriate Elevator for Your Building

Selecting the right elevator will enhance efficiency, safety, and accessibility in your building. Evaluate your building’s needs, and choose an elevator that best offers optimal performance. At Keystone, we’re here to help with your elevator needs. Contact us today, and we’ll be glad to guide you accordingly.

elevator modernization

How Elevator Modernization Can Save Your Commercial Property Time and Money

Outdated commercial elevators can use as much energy in a year as a household in four months. That’s a significant energy cost for property owners and managers. Especially when such elevator systems are prone to breakdowns and safety hazards.

But elevator modernization can remedy these problems. Upgrading your elevators reduces energy consumption to save time and money in the long run. Modernization also increases your commercial property value, securing your investment for the future.

This article details the benefits of elevator modernization in commercial buildings. Read on to discover how elevator modernization can help your property today.

Improved Safety and Reliability

Outdated elevator systems are prone to breakdowns. Breakdowns don’t just lead to downtime and loss of productivity. They also pose safety hazards for passengers.

Modernizing elevators can address these issues by upgrading critical components in most types of elevators:

  • Control systems
  • Motors
  • Doors
  • Hydraulics

Updating these elevator requirements reduces the number of breakdowns. Fewer breakdowns mean fewer accidents. Thus, you can mitigate regular maintenance prices and ensure safety.

Enhanced Energy Efficiency

Elevators can consume a large amount of energy in commercial buildings. However, updated elevators often use advanced energy-efficient tech. This includes the following:

Regenerative Drives

Regenerative drives capture energy produced during braking. Then, they feed it back into the building’s electrical grid. This kind of energy recycling helps cut costs and energy consumption at your commercial property.

LED Lighting

Modern elevators often use energy-efficient LED lighting instead of incandescent bulbs. LED lights use less energy and last longer than classic bulbs. So, making the switch cuts maintenance costs and energy use.

Sleep Mode

The sleep mode feature of modern elevators is a game-changer for energy savings. Sleep mode can sense when the elevator is not in use. It shuts down the elevator’s interior lighting and ventilation systems during those times.

Elevator modernization via sleep mode helps cut energy bills during low-traffic periods. If no one uses your commercial elevator, it isn’t consuming energy.

Variable Frequency Drives

Variable frequency drives (VFDs) help reduce energy consumption by controlling motor speed.

Traditional elevator systems use a fixed-speed motor. This means the engine always uses the same energy to move the elevator, regardless of the load.

In contrast, elevators equipped with VFDs can vary the speed of the motor. With VFDs, the rate varies depending on the weight of the elevator car, including riders.

When the elevator car has a light load, the VFD can slow down the motor, reducing the energy needed to move the car. When the car has a heavy load, the VFD can speed up the engine to compensate for the additional weight.

By honing the elevator speed to match the load, VFDs reduce the energy needed to use the elevator. VFD-equipped elevators can reduce energy consumption by 70% compared to traditional systems.

Increased Property Value

Upgrading your elevator system can increase the value of your property. Modern elevators enhance the aesthetic appeal of the building. But they also provide better functionality and accessibility.

These features are attractive when the time comes to sell. Buyers may pay more for buildings that already have aesthetic and accessibility features. That way, they don’t have to make these upgrades on their dime.

Elevator Modernization Near Me: Trust the Experts

Elevator modernization is a smart investment for commercial buildings. New elevator technology helps building owners and managers save time and money. It also improves the safety and efficiency of commercial elevators.

At Keystone Elevator, we specialize in top-quality elevator upgrades for commercial property owners. Whether you’re on a budget or have a complex project, there isn’t anything our team can’t handle. Our experienced technicians and engineers can find a solution for your needs.

If you need elevator modernization, Keystone Elevator is here to help. Contact us today to learn more about our services.

3 Signs Your Property Needs A Dumbwaiter Repair

The dumbwaiter market is set to rise to $972 million by 2023. These small elevators are vital in many hospitality and catering businesses, but you need to know about dumbwaiter repair to keep them safe to use.

Dumbwaiters share most of the same technology as elevators, and they require the same level of elevator maintenance. If you are new to dumbwaiter repair 101, it can be tricky to spot issues.

Wait too long, and your dumbwaiter could cease to function or even become dangerous.

Our dumbwaiter repair guide can help you spot issues. Read on to learn more!

1. Noisy Operation Is a Sign You Need Dumbwaiter Repair

Dumbwaiters should operate in near-silence. Many of them link noisy kitchens with upper catering floors, and with all the racket of cooking, a clanging, grinding dumbwaiter is the last thing you need.

Parts of your dumbwaiter will wear over time, and if you use it a lot, you need to keep your ears pricked for unpleasant sounds. Moving parts may need some lubrication, but if the problem is more serious, you may need to book a replacement service.

Cost-effective elevator maintenance gives you peace of mind. Friction and worn parts can become dangerous, and you will save money and stress if you repair an elevator early.

2. Loss of Efficiency

Smooth operation is key for dumbwaiters, and they can be a cost-effective way to transport goods between levels. If you notice your dumbwaiter is moving slower than normal, jerking as it moves up, or even stalling, it is time to book a dumbwaiter repair.

Depending on the cargo, jerky motions can damage goods or even make them fall. This could cause injury if they move off the platform and down the shaft. Spotting jerking motions or stalls can help you avoid a breakdown – in most cases, if this happens, you will have to replace your dumbwaiter.

Try timing your dumbwaiter as it lifts with and without cargo. Does your dumbwaiter or elevator guide cargo with ease?

Keep the weight consistent and watch to see if it slows over time. Slow operation means it is time for an inspection and dumbwaiter repair.

3. The Doors Strain to Open

The doors of your dumbwaiter should work as smoothly as the dumbwaiter itself. They should open and close symmetrically and in near-silence. When your dumbwaiter doors struggle to open, jam, or sit crooked, a dumbwaiter repair is in order.

Doors can become dangerous and even trap hands if dumbwaiter repair is neglected. Regulations must be followed if you want to stay compliant. Slow doors will slow your business operations, and over time this could result in financial losses.

Test your dumbwaiter doors at regular intervals, and if you notice anything strange, book an inspection to check the mechanism.

How to Find a Dumbwaiter Engineer Near You

Dumbwaiter repair keeps your business in safe working order. By knowing what to look for, you can spot problems early, fixing them before they get worse!

Keystone Elevator Service & Modernization can take care of everything for you. Based in Weymouth, MA, our team offers 24-hour services, installation, repair, and preventative fixes. We work with both commercial and residential customers across Massachusetts, Rhode Island, New Hampshire, and Maine.

Our team is fully licensed, experienced, and expertly trained. We have served the area since 1995, and we always put you first.

Fix your dumbwaiter today!

What to Expect with a Commercial Elevator Installation

If your commercial building has multiple floors, you should consider installing an elevator to enhance accessibility for your tenants and customers. This is a requirement by the Americans with Disabilities Act (ADA) law and it is best to comply and avoid possible legal issues.

If you have an upcoming commercial elevator installation, you must plan your project before implementation to ensure proper functionality and meet safety codes. Read this quick guide for what to expect.

Your Building’s Support and Structure Evaluation

Assessing the support and structure of your building determines the feasibility and safety of the installation. The process involves evaluating the current state of the property. This includes assessing the layout, design, and materials used to check if your building can support the weight and size of an elevator.

During the evaluation, a professional will assess the load-bearing capacity of the foundation, walls, and floors. They will consider the elevator shaft size, location, and possible structural challenges hindering installation.

If the professional deems your building suitable for an elevator installation, they will create a detailed plan for the project. Considerations include the elevator size, shaft, components, and necessary modifications to your building’s structure.

Guide Rails and Rail Brackets Installations

Guide rails are the vertical tracks that guide the elevator car as it moves up and down the shaft. They attach to the shaft’s walls, allowing the elevator car to stay on course without swaying or drifting.

Rail brackets secure the guide rails to the shaft’s wall. With a robust design, they can withstand the elevator car’s weight and the forces from its movement. Here are the steps to install guide rails and rail brackets during your commercial elevator installation:

  • Measuring the guide rail length and cutting it to size based on the elevator’s specifications
  • Positioning the guide rails in the shaft to make them parallel to each other and level
  • Marking the location for the rail brackets on the shaft’s wall
  • Drilling holes in the marked areas for the rail brackets
  • Securing the rail brackets to the shaft’s wall using the appropriate hardware
  • Attaching the guide rails to the rail brackets and adjusting them as necessary

Elevator Drive Fitting

The drive allows the elevator car to move up and down the shaft and involves the following steps to install:

  • Installing the drive machine on the top or bottom of the elevator shaft
  • Attaching the drive belt or chain to the drive mechanism and the elevator car
  • Connecting the drive mechanism to the elevator’s control system
  • Testing the drive by running the elevator through a complete cycle
  • Adjusting the drive as needed for smooth operation.

Carriage and Gates Installation

The carriage is the platform where the elevator car rests while gates prevent passengers from falling into the shaft. This commercial elevator installation step involves aligning the carriage with the guide rails, attaching it to the hoist ropes, and securing it to the elevator.

Electrical Wiring Installation

Electrical wiring prepares your elevator for commercial use. After wiring the most significant components, the professional tests the system for efficiency and proper functioning. The final step is getting certification to start using your elevator.

Get Commercial Elevator Installation Today

Elevator installation in your commercial property can impact your tenants’ experience, giving you a competitive edge. Work with reputable service providers like Keystone to get the most out of your investment. Are you ready to get started? Contact us today!

Hydraulic Elevator System: Here’s How They Work

Most people think that elevators became popular and commonplace in the mid to late 1800s, but the history of elevators goes back way further. The elevator concept was first designed by Archimedes in Ancient Greece circa 336 BC. The Roman Empire then expanded the concept, using primitive elevator platforms in their arenas, prisons, and other infrastructure.

Though those early lifts were powered by people, animals, or water wheels, modern iterations use the pulley (traction) system or hydraulics. In this article, we are going to discuss the marvels and benefits of a hydraulic elevator system.

Hydraulic Systems

A hydraulic system works by taking advantage of changes in pressure to create movement or to hold a form. Modern hydraulics are made of two or more pistons with hollow chambers. Pipes and valves connected to the pumps connect these chambers together and the entire system is filled with hydraulic fluid or oil.

The pumps make the oil flow between the piston chambers and the valves help maintain the system’s desired pressure. The resultant change in pressure generates an equal amount of force. The system can then move or compress whatever is connected to the hydraulic mechanism.

How a Hydraulic Elevator System Works

A hydraulic elevator uses a piston hydraulic system to move up and down, differing substantially from a conventional traction elevator. The piston, or ram, sits in a hole under the cab and shaft. Somewhere near the base of the piston is an oil reservoir, a pump, and a motor to run the pump.

When the piston is empty, the elevator cab is at its lowest point. When the elevator operator wants it to rise, a valve opens and allows hydraulic fluid into the hollow chamber of the piston. The pump will then pump the hydraulic fluid into the chamber, creating more pressure.

The increased pressure causes the piston to extend, which drives the cab upward. Once it reaches the desired floor, the valve will close and the pump will switch off. The closed valve ensures that the pressure cannot decrease because that would cause the piston to collapse again.

When the user wants to come down again, the whole process happens in the opposite direction. The pump pumps fluid out of the piston and the decreasing pressure lets the cab come down as the piston collapses.

Why People Choose Hydraulic Elevators

Hydraulic elevators are popular for low-rise buildings with less room for equipment. Traction elevators need a separate machine room, whereas hydraulic lifts can have all the essentials in the pit under the shaft. Their elevator installation costs and maintenance are also cheaper than traction elevators.

The only downside to hydraulic elevators is that they can only go up to 7 stories, which is why traction elevators are more common in high-rise buildings.

Learn More About Elevators With Us

Hydraulic elevators are wonderful for projects with limited cash and space budgets. Because they use hydraulic pistons to move, they only need a shaft and a pit to house their essential equipment.

A power or system failure can also never cause a dead drop. A malfunction can only ever allow the elevator to descend as fast as the pressure drops in the piston.

If you want to install a hydraulic elevator system or learn more about elevator types, then check out our blog today. We can help you with installation, maintenance, elevator operation, and more!

The Benefits of Having Consistent Elevator Inspection Services

Did you know that commercial elevators have been in operation around the globe for more than 125 years?

When the first electrical elevator was unveiled at the 1854 World’s Fair, it changed transportation. People no longer had to walk up flights of stairs to arrive at their destination. Elevators introduced a convenience that many take for granted today.

While there are great benefits to elevators, issues can occur. Elevators are machines and can break down unexpectedly. This is why it is essential for them to be well-maintained and regularly inspected.

Continue to read to learn more about the benefits of elevator inspection services.

The Importance of Elevator Load Testing

One of the most important aspects of maintaining an elevator system is occasional testing. One such assessment is a load test. During a load test, the elevator will be inspected to see if it can handle its maximum load capacity while traveling at a considerable speed.

Additionally, load tests will monitor an elevator system’s breaks and determine if they are working properly. Load capacity, speed, and brakes are all examined in detail to ensure passenger safety and comfort.

Load tests should occur every five years. This is a legal requirement in certain cities.

Routine Examinations

Elevators should be routinely examined every year to ensure their overall safety. The American National Standards Institute has strict regulations in place,c and all elevators in the U.S. must adhere to these codes. In some cities and states, yearly exams may be legally required.

The Consequences of Not Examining and Maintaining an Elevator

There are serious implications to not inspecting your elevator system on a frequent basis. Foremost, your guests’ safety may be compromised.

A critical issue could occur, and in turn, your guests would be injured. If you had invested in an elevator inspection, you could have prevented this issue before it had undesirable consequences.

Beyond guest safety, elevator inspections ensure that your system is up to date with all government regulations. If your system does not adhere to these codes, your state or city may force it to cease operation.

Elevator inspections also help discover minor issues before they become problematic. When these small problems are handled in a proactive way, you will have a longer-lasting and safer elevator system.

Invest in Comprehensive Elevator Inspection Services

Comprehensive elevator inspection services can improve your system’s longevity. More so, it will provide better protection for your guests. Safety should always be your first priority as a commercial elevator operator.

At Keystone Elevator Service and Modernization, we believe routine elevator inspections are critical. Our team of experienced professional technicians will examine your system in detail to ensure it is working to its full potential.

We offer a variety of services, including elevator repair, state elevator inspection, testing, and preventive maintenance. To learn more about us and how we can be of assistance to you, we invite you to contact us today.